Monday, January 8, 2018

Heavy Duty Sliding Barn Door Hardware Kits Starting $59.99 (Reg. $89.95+)

I would love to add these to my house!  Today only and while supplies last this Industrial by Design Heavy Duty Sliding Barn Door Hardware Kit starts at only $59.99 (Reg. $89.95+)!

What You Get:

  • 6-Foot 7-Inch or 8-Foot Rail: A single rail includes five pre-drilled holes every 16" on center. Holes begin 7 1/2" on center from each end of the rail. Rail is constructed of solid 1/4" thick steel, finished with our highly durable powder coating. This gets baked onto the steel at 400 degrees and creates the strongest bond possible.
  • Rail Hardware: Five lag bolts with washers and ten rail spacers attach the rail securely to the studs (or header board) for supporting up to 225 pounds comfortably.
  • 2 Hangers: These hangers are built with our premium nylon wheels, which are often an expensive upgrade at other shops. We made these the standard wheel for all our kits, and have tested our finished hangers beyond 100,000 rolls. Two different sets of bolts for attaching hangers to the door are included in order to accommodate doors ranging from 1 1/4" to 1 3/4" thick.
  • 2 Door Stoppers: Two door stoppers slide along the rail and tighten down at any point to stop your doors exactly where you want, and they're cushioned by rubber caps for a quiet close.
  • Floor Guide: A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard.

*NOTE: Hardware only. Door is not included*

No comments:


Blog Design By Sour Apple Studio © All Rights Reserved. | Copyright © My City Mommy LLC 2009 All Rights Reserved